There are two main areas in which brands showcase their latest breakthroughs: the movement, of course, and the introduction of new and innovative materials and technologies for a watch’s case. Swiss made replica IWC Schaffhausen is a pioneer in both. The latest contribution to demonstrate the Swiss manufacturer’s technical prowess is a fully luminous watch case that emits a bluish glow for up to 24 hours. The same rings true for the dial and strap. The concept watch in form of a cheap fake IWC Pilot’s Watch Chronograph 41 was first spotted on Lewis Hamilton’s wrist during the 2024 Monaco GP which took place this past weekend. According to perfect fake IWC, the Ceralume technology, which is patent pending, will form the basis for future developments and releases.

Ceramic is light, extremely hard and highly resistant to scratches. Over almost four decades, luxury replica IWC has acquired extensive expertise in the development of ceramic watches. In 1986, the Swiss luxury watchmaker launched the world’s first wristwatch with a black zirconium oxide ceramic case. Since then, aaa quality fake IWC’s major ceramic innovations have included watchcases made of brown silicon nitride ceramic and black boron carbide ceramic, one of the hardest materials known. After introducing a series of TOP GUN models in strikingly colored ceramics, best 1:1 copy IWC is now pushing the boundaries with Ceralume. This luminescent ceramic is produced using a highly sophisticated and patent-pending manufacturing process developed by IWC’s engineering division XPL.

Conventional white ceramic is made by mixing zirconia with other metal oxides. These powders are formed into a so-called green body, machined to the case shape, and then sintered at high temperatures in a kiln. Super-LumiNova pigments are added to the raw material mix to make the white ceramic glow in the dark. One of the main challenges is to achieve a perfectly homogeneous mixture of raw materials despite their different particle sizes and to avoid particle agglomeration, so Swiss movement replica IWC engineers used a special ball milling process that had to be customized to the raw materials used. In addition, the parameters of the sintering process and the grinding of the sintered ceramic body had to be specifically adapted to the luminous ceramic.